The industrial workhorse for steady, continuous demand. Runs at a set pressure with long service intervals.
3 to 335 HP · 9 to 1,490 CFM · 100 to 175 PSI
See a model
Industrial air compressor equipment for Southern California and Las Vegas
Factory authorized distributor for Chicago Pneumatic, Powerex, Pneumatech, and Mark Compressors, and an authorized Donaldson dealer. We also source parts and replacement units for most other major brands, so a mixed equipment fleet stays with one supplier. Southern California and Las Vegas.
Pictured: a Chicago Pneumatic CPM 5 tank-mounted compressor on a production floor.
Air Systems
Industrial Air Compressor Equipment We Supply
Toolytics supplies industrial air compressor equipment sized, supplied, installed, and serviced across Southern California and Las Vegas, built around how a compressed air system actually works: compressor, dryer and filtration, storage, and distribution to point of use.
01CompressorGenerate the air
02Dryer & filtrationControl moisture and contaminants
03Receiver storageStabilize pressure and demand
04PipingDeliver air efficiently
05Point of useProtect tools and equipment
Primary Air Source
Industrial air compressors
Rotary screw, reciprocating, and oil-free scroll equipment selected around your actual demand, pressure, and duty cycle. Most of what we install falls between 15 and 100 HP. Work out what size you need.
- Fixed-speed and variable-speed systems
- Base-mounted, tank-mounted, and packaged configurations
- New installations, replacements, and capacity expansions
2 to 335 HP · 6 to 1,490 CFM · 100 to 175 PSI
Compressor types we supply
Four ways to make compressed air, matched to demand, duty cycle, air quality, and the pressure your equipment needs. Most of what we install runs between 15 and 100 HP.
Motor speed tracks air demand, so the compressor makes only the air you use. The efficient choice when load swings through the day.
3 to 335 HP · to 175 PSI · permanent-magnet and geared
See a model
Class 0 air with no oil in the stream, for processes where a trace of oil is a defect. Scroll and oil-free screw designs.
2 to 75 HP · 6 to 328 CFM · Class 0 clean air
See a model
Two-stage piston units for smaller shops, intermittent duty, and higher-pressure point work. Tank mounted or bare pump.
3.5 to 20 HP · 12 to 70 CFM · to 175 PSI
See a model
High-pressure boosters
A booster is a compressor that raises existing shop air to a higher pressure for PET blowing, pressure testing, laser cutting, and process work. Air or nitrogen, from 3 to 40 HP and up to 580 PSI.
Featured Model Examples
Models we supply most often
One representative model per compressor type, with Chicago Pneumatic’s published specifications. Final sizing is matched to your demand, pressure, and duty cycle.
Rotary screw
Request QRS 25 pricing →
CP QRS 25
Fixed-speed rotary screw
| Horsepower | 25 HP |
|---|---|
| Capacity | 99.4 CFM |
| Max pressure | 125 PSI |
| Outlet | 1.0 in |
Variable speed
Request CPVS 50 PM pricing →
CP CPVS 50 PM
Permanent-magnet variable speed
| Horsepower | 50 HP |
|---|---|
| Capacity | to 237 CFM |
| Max pressure | 175 PSI |
| Outlet | 1.25 in |
Oil-free
Request SPR 10 pricing →
CP SPR 10
Oil-free scroll
| Horsepower | 10 HP |
|---|---|
| Capacity | 24.2 CFM |
| Max pressure | 145 PSI |
| Air quality | Class 0 |
Reciprocating
Request RCP-C583VS pricing →
CP RCP-C583VS
Two-stage piston, tank mounted
| Horsepower | 5 HP |
|---|---|
| Capacity | 18 CFM |
| Max pressure | 100 PSI |
| Receiver | 60 gal |
Everything downstream matters.
A properly selected compressor only performs as well as the equipment that treats, stores, and distributes its air.
Dryers & air treatment
Remove moisture, oil aerosols, and particulate before they reach your process or equipment.
- Refrigerated and desiccant dryers
- Coalescing and activated-carbon filtration
- Sized to flow and required dewpoint
Receiver tanks & storage
Stabilize pressure, handle demand spikes, and reduce unnecessary compressor cycling.
- Vertical and horizontal receivers
- Wet and dry storage strategies
- Pressure-rated and code-compliant vessels
Piping & distribution
Deliver air with lower pressure drop, cleaner installation, and easier future expansion.
- Aluminum distribution systems
- Loop design and branch drops
- Compressor-room-to-point-of-use installation
System Support
Protect, control, and monitor the system.
Condensate management
Automatic drains, oil-water separators, and condensate treatment for cleaner system operation.
70 to 2,500 CFM · CARB-certified options
View Condensate Equipment
Controls & monitoring
Sequencing, pressure control, and system visibility for multi-compressor rooms and critical applications.
ES4000 Connect, Advanced, Touch
View System Controls
Point-of-use components
Filters, regulators, drains, and accessories selected around the needs of tools and process equipment.
View Point-of-Use ComponentsNeed compressor parts or a maintenance kit?
Send the equipment make, model, serial number, and required part information. We can help identify and source the correct items.
Filters · Separators · Lubricants · Belts · Valve Kits · Service Kits
On-site gas generation
Produce nitrogen or oxygen on site from your compressed air and reduce dependence on cylinder or bulk delivery, where the application supports it.
On-Site Nitrogen Generation
PSA and membrane nitrogen for packaging, laser cutting, heat treating, and inerting, at purity up to 99.999% for your process.
Explore Gas GenerationOn-Site Oxygen Generation
PSA oxygen up to 95% purity for applications that would otherwise depend on delivered cylinders or bulk supply.
Explore Gas GenerationTell us what the system needs to do.
Share the existing equipment, operating pressure, application, available power, and production concerns. We’ll help identify the right next step.
Related Equipment
Related equipment
The same Chicago Pneumatic relationship also covers industrial air tools and portable construction equipment. We supply, install, and service both across Southern California and Las Vegas.
FAQ
Common Questions
-
Do you sell equipment, or only service it?
Both. We are a factory authorized distributor for Chicago Pneumatic, Powerex, Pneumatech, and Mark Compressors, and an authorized dealer for Donaldson Filtration Solutions. We supply, install, and then service what we sell, which means one vendor for the equipment and the maintenance behind it.
-
How do I know what size air compressor I need?
Size it on total air demand, duty cycle, and the pressure your equipment requires, not on horsepower alone. Adding up the nameplate ratings of every tool oversizes the system, and ignoring simultaneous use undersizes it. Our air compressor sizing guide walks through the method with published figures, or we can run a system assessment on site.
-
Do you carry parts for equipment you did not sell?
Yes. We source separator elements, air and oil filters, lubricants, belts, and valve kits across most major brands, OEM or quality aftermarket. Tell us the make, model, and serial number and we will identify the right part.
-
Do you sell pneumatic tools as well as compressors?
Yes. We supply the full Chicago Pneumatic industrial air tool line, including impact wrenches, grinders, drills, and assembly tools, with published torque and air consumption specs. For portable and construction equipment, see our Chicago Pneumatic Power Technique range.
-
Do you sell to businesses only?
We supply industrial and commercial facilities, not consumers. Our customers are manufacturing plants, fabrication shops, logistics operations, and maintenance departments across Los Angeles, Orange, Riverside, and San Bernardino counties, plus the Las Vegas metro. Everything is quoted rather than sold from a shelf.
-
Can you replace a compressor from a brand you do not carry?
Yes, and it is common. We service equipment from most major manufacturers and regularly replace aging units with Chicago Pneumatic, Pneumatech, or Mark equivalents. Call (844) 310-8665 and we will match the specification.
Last updated July 2026
After the Sale
We service what we supply
The technicians who install a unit are the ones who maintain it. Warranty compliance handled, genuine parts, and one vendor for the equipment and the maintenance behind it.
Preventive Maintenance
Planned service plans with documented visits, sized to your equipment.
Explore →
Repair Services
Diagnostics and repairs across most major brands, with genuine parts.
Explore →
System Installation
Turnkey installation and commissioning of new or replacement units.
Explore →
Compressed Air Assessments
On-site audits to find leaks, pressure drop, and wasted energy.
Explore →
Request a Quote
Need a quote on equipment or parts?
Tell us what you need and we'll follow up quickly with pricing and availability. Call (844) 310-8665 or email [email protected].